The End of the Season

It's the end of the season and we are back to work in Tennessee.  The Archimedes is safe and sound in a marina on Merritt Island, Florida.  We thought about leaving it in the Cocoa Village anchorage, temped by the idea of a free place to park but we found the thought of leaving the boat unattended on the hook in a sometime very choppy basin was too nerve wracking so we moved to a calm, sheltered marina. The extra $350 bucks per month is well worth the peace of mind.

Cocoa Village Anchorage

In the marina.

We'll be back soon to begin moving the Arc further up the coast somewhere in to the Carolina's so we can continue working on it this summer.

They Don't Call It On The Hard For Nothing!

The boat is out of the water on the hard and it's time for the work to begin.  We started by chipping barnacles and oysters from the bottom, sanding the freeboard and the bottom, wiped it down and she was ready for paint.  Sounds so easy doesn't it?   Shew!  It's hard, hot work.

Not too many barnacles.  But there were oysters aplenty on the keel coolers.

There were quite a few oysters on the keel coolers.  This is just 1/2 of them as we had already cleared out a bucket full when I took this picture.

Here's how she looked at the beginning.

I worked on the freeboards.

While Carter worked on the bottom.

Carter and I both had our boat yard fashion on!

Good News!  Carter had 2 qualified opinions on the cutlass bearing and both agreed that it is in good shape and does not need to be replaced at this time.  Carter had already planned to replace the current auto prop with the original 3 bladed prop.  The picture above shows the new prop installed with the auto prop on the ground below.

Cleaning the keel with wire brush.

 There were a few places that needed to be repaired and Carter spent a good bit of time mixing epoxy patch material and trowling it on, then grinding it down, nice and smooth.

We had time to paint the superstructure.

Wow!  She looks real nice to us!

 

Both freeboards, all of the superstructure, and the outsides of the bottom are painted.

We have time to paint the stripes on the freeboard.

We thought this would be a good time for a before and after comparison.

This was when Carter moved the Ketch Du Jour from Matlache to the Oxbow where it stayed for about 2 years.  The 30 year old wooden masts were taken down because of decay. 

During this down time Carter built a solar powered dingy for the late Ellen Peterson at Happehatchee in Estero, Florida and that was when the idea for solar power propulsion was born.

After a two year recovery from the auto accident Carter was ready to get back to work on the boat.  This is when I came in to the picture and this was my first look at the "Hal".  The boats first name was the Halcyon and that is what Carter always called her.

And here is how she looks this morning!

She's ready to go back into the water. 

There is still plenty of work yet to be done but we're done in the yard.

The Haul Out

We set off for the boat yard early Monday morning for our 12:30 appointment for haul out.  We expected it to take approximately 4 hours using the electric motor and figuring in some extra time to go through the Ortona Lock.  We made it right on time.  As stated in my last post, the next project was to finish wiring the panels.  Carter took advantage of the 4 hour trip to get some of this work done.

I'm sure this is 'old hat' for some of you out there but this is all new to me and it was facinating.

There was much discussion about where to place the straps.

She's out and ready to be cleaned up.

And now to go to our spot in the yard for the next couple days.

With the twin keels it was pretty simple to block it up and set her down.

Not too many barnacles.

But there were quite a few oysters on the keel cooler.

Carter worked the first part of the day scraping the oysters off and detailing it out.

Nice job.

There is just so much more work to be done!

Getting Ready for the Yard

There has been lots to do getting ready to go to the boat yard for the much needed bottom job. Carter estimates the boat hasn't been hauled out in over 15 years.  We also plan to paint the freeboard. We'll see how far we get.

But first we had to begin cleaning up our yard in the oxbow and we started with the Airstream.  We have been trying to sell it ourselves but to no avail.  Carter found an RV Exchange up in Tampa that will sell it for us on consignment so he set about replacing the flooring to make it more appealing to prospective buyers.  It turned out really good!  He also had a friend come by to repair the tongue. Then we pressure washed it and off to Tampa we went.

Good as new!

In preparation for the possibility of getting water in the cockpit,  Carter has placed weatherstripping around the opening for the engine room. He will double protect the opening with caulk.

Carter decided to put the original pulpit back on the boat.  He rented a pipe bender, we made a few key bends and now we have a pulpit! 

 

We spent a day washing and scrubbing the boat in preparation for painting. Carter recruited some help to come over and prime the superstructure and and the walkways.
We put non-skid on the walkways... niiiice!

The deck is cleared off and scrubbed down and a layer of primer is going down.

Next Carter worked on finishing up some structural issues to install the remaining 4 solar panels. The main column needed to be centered on the hinge for the actuator to line up with later on and some additional bracing needed to be installed. Above, the panels are in the full upright position to allow Carter access to remove the old wood structure.

SURPRISE!  Frog the face.

When we dropped the old wood beam we found a stowaway...

Just hangin around while Carter continued to work!

We relocated him to the scrap pile!

He seemed happy enough.

 Ribbit....Ribbit

We had to take out the center posts so the panels could be lowered all the way to the deck .  We left a stub to be incorporated into removable handrails that can double as gangways. We covered the cockpit floor with gangplanks. 

And the last 4 panels are up!

Next will be the task of wiring them up.

In the middle of all this work, our friends Gordon and Kim came by and joined us for dinner

"on the lanai"  !  LOL

Some of the darndest things happen.  Just before dinner, a boater from across the river informed us that our whaler had slipped its mooring and blown across the oxbow.  No problem,  Carter jumped in the kyack and went to the rescue!

If you look close you can see the whaler under the catamaran's right starboard wing. 

  Boston Whaler in the right corner pocket! Ha! Ha!

We topped off the day with a sunset cruise in the rescued whaler. 

The Caloosahatchie is blessed with some of the most beautiful sunsets I've ever seen.

We are spending this weekend cleaning up the yard behind us and packing up the boat
 because once we are out of the boat yard we intend to make our way across
Lake Okeechobee and then North from Stuart to Cape Canaveral.   

The Oxbow in LaBelle